在思科路由器IOS15.5極其以上版本， 針對RP2以上平臺進行了license控制，雖然load了enterprise版本，但是，如果一下命令不被執行，則，啟動的就是ipbase版本，很多命令都被限制了。
執行完該命令，然后重啟系統，就OK了。
不需要額外的license申請，只要執行一下就可以了，不知道將來還會有什么后續動作，呼呼
【南寧思科培訓】
- PE4-ASR1006-10#
- PE4-ASR1006-10#
- *Nov 5 12:07:58.244 CST: %SYS-5-CONFIG_I: Configured from console by consoleconf t
- Enter configuration commands, one per line. End with CNTL/Z.
- PE4-ASR1006-10(config)#boot ?
- bootstrap Bootstrap image file
- config Configuration file
- host Router-specific config file
- network Network-wide config file
- system System image file
-
- PE4-ASR1006-10(config)#licens
- PE4-ASR1006-10(config)#license ?
- accept Accept all further License Agreements
- agent Configure LIC_AGENT
- boot license boot config commands
- call-home license call-home config commands
- smart Smart licensing
-
- PE4-ASR1006-10(config)#license boot
- PE4-ASR1006-10(config)#license boot ?
- level which level to boot
- suite which suite to boot
-
- PE4-ASR1006-10(config)#license boot le
- <strong>PE4-ASR1006-10(config)#license boot level ?
- adventerprise Advanced Enterprise License Level
- advipservices Advanced IP Services License Level
- ipbase IP Base License Level</strong>
-
- PE4-ASR1006-10(config)#<strong>license boot level adventerprise</strong>
- PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
- LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
- PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
- TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
- BY ALL THE TERMS SET FORTH HEREIN.
-
- Use of this product feature requires an additional license from Cisco,
- together with an additional payment. You may use this product feature
- on an evaluation basis, without payment to Cisco, for 60 days. Your use
- of the product, including during the 60 day evaluation period, is
- subject to the Cisco end user license agreement
- http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
- If you use the product feature beyond the 60 day evaluation period, you
- must submit the appropriate payment to Cisco for the license. After the
- 60 day evaluation period, your use of the product feature will be
- governed solely by the Cisco end user license agreement (link above),
- together with any supplements relating to such product feature. The
- above applies even if the evaluation license is not automatically
- terminated and you do not receive any notice of the expiration of the
- evaluation period. It is your responsibility to determine when the
- evaluation period is complete and you are required to make payment to
- Cisco for your use of the product feature beyond the evaluation period.
-
- Your acceptance of this agreement for the software features on one
- product shall be deemed your acceptance with respect to all such
- software on all Cisco products you purchase which includes the same
- software. (The foregoing notwithstanding, you must purchase a license
- for each software feature you use past the 60 days evaluation period,
- so that if you enable a software feature on 1000 devices, you must
- purchase 1000 licenses for use past the 60 day evaluation period.)
-
- Activation of the software command line interface will be evidence of
- your acceptance of this agreement.
-
-
- ACCEPT? (yes/[no]): yes
- % use 'write' command to make license boot config take effect on next boot
-
- PE4-ASR1006-10(config)#
- *Nov 5 12:08:22.686 CST: %LICENSE-6-EULA_ACCEPTED: EULA for feature adventerprise 1.0 has been accepted. UDI=ASR1006:NWG1423002E; StoreIndex=0:Built-In License Storage
- *Nov 5 12:08:23.796 CST: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = asr1001 Next reboot level = adventerprise and License = adventerprise
- PE4-ASR1006-10(config)#
- PE4-ASR1006-10(config)#
- PE4-ASR1006-10(config)#
- PE4-ASR1006-10(config)#end
- PE4-ASR1006-10#
- PE4-ASR1006-10#wr
- Building configuration...
-
- *Nov 5 12:08:27.172 CST: %SYS-5-CONFIG_I: Configured from console by console[OK]
- PE4-ASR1006-10#
- PE4-ASR1006-10#
| 
